View previous topic :: View next topic |
Author |
Message |
WAVEDAVE
Joined: 22 Aug 1997 Posts: 143
|
Posted: Sat Mar 26, 2005 11:09 am Post subject: redecking production board |
|
|
I want to redeck my carbon board , I have a spray gun and compresser, what materials will I need and the procedure involved as well as a place to buy the stuff? |
|
Back to top |
|
|
spyder
Joined: 24 Sep 1996 Posts: 2790 Location: oahu
|
Posted: Sat Mar 26, 2005 3:19 pm Post subject: RE: redecking production board |
|
|
We use clear urethane and deck dust which you can get at fiberglass hawaii
(I am sure other places have it too) |
|
Back to top |
|
|
ron.c
Joined: 30 Oct 2004 Posts: 1460
|
Posted: Sun Mar 27, 2005 6:08 pm Post subject: RE: redecking production board |
|
|
What about using that stuff called Redeck? It comes complete in a can, roll it on and cures in sun light? Ive used it on my F2 Axxis with very good results.
RC |
|
Back to top |
|
|
hilton08
Joined: 02 Apr 2000 Posts: 506
|
Posted: Sun Mar 27, 2005 6:40 pm Post subject: RE: redecking production board |
|
|
There is a product called Re-Deck that works great. It is available from most windsurf shops. It requires no mixing, just shake it up and roll it on (roller included). Dries clear, stays clear. A lot less hassle than trying to spray it on. |
|
Back to top |
|
|
carl
Joined: 25 Feb 1997 Posts: 2674 Location: SF bay area
|
Posted: Sun Mar 27, 2005 9:19 pm Post subject: RE: redecking production board |
|
|
If you like a rougher surface than Redeck gives, just sprinkle some course white sugar on the wet Redeck, works great, stays clear (unlike sand). BTW The Redeck I got didnt need sun to cure, but bad laquer smell, vent the garage well. |
|
Back to top |
|
|
WAVEDAVE
Joined: 22 Aug 1997 Posts: 143
|
Posted: Fri Apr 01, 2005 5:56 pm Post subject: RE: redecking production board |
|
|
doesnt sugar turn yellow after some time, wouldnt acrilic dust work better on the deck? |
|
Back to top |
|
|
carl
Joined: 25 Feb 1997 Posts: 2674 Location: SF bay area
|
Posted: Sat Apr 02, 2005 10:55 am Post subject: RE: redecking production board |
|
|
Dont know, I did it on a yellow board. I heard of using sugar on another forum, and it worked great and it was already in my kitchen. I need to do a white board next, I wonder where do you get that acrillic stuff in the SF bay area (south)? **********************
doesnt sugar turn yellow after some time, wouldnt acrilic dust work better on the deck? |
|
Back to top |
|
|
VinceSF
Joined: 05 Apr 2005 Posts: 249 Location: Maui, HI
|
|
Back to top |
|
|
|